How do I know if there is a fault?
Your dishwasher will self-diagnose and let you know by beeping continuously.
If there is a fault in one of the drawers:
The drawer indicator of the drawer with the fault will
flash red, and the fault code will flash in the display.
If the fault is on a non-selected drawer, the display will
revert to the flashing fault code for the affected drawer.
Note:
If a fault occurs in one drawer only you are still able to
●
●
use the other drawer.
if you have paused a drawer and the drawer indicator was
●
●
flashing red, and the other drawer then faults, the paused
drawer indicator will switch to flashing white.
If there is a fault in both drawers:
the selected drawer indicator will flash red and the
●
●
fault code will flash in the display.
the drawer indicator of the other drawer will also
●
●
flash red.
Press the
button to scroll between the drawers and
●
●
note down the fault codes for each drawer.
There may be the same code flashing for both, or two
different codes flashing, depending on the faults.
What should I do if there is a fault?
You may be able to fix some of the faults yourself – with others, you will need to contact
Fisher & Paykel Customer Care to organise a visit by a service technician.
IF THERE IS A FAULT
Fault on the top drawer only
Upper Drawer
indicator flashing red
Fault on both drawers
Both Drawer
indicators flashing red
27