Troubleshooting - Fisher & Paykel DishDrawer DD24DA User Manual

PROBLEM
Unclean dishes
Foaming
22

TROUBLESHOOTING

POSSIBLE CAUSE
Wash program unsuitable
for the load.
Spray arm unable to
rotate.
Drawer overloaded/
incorrectly loaded.
Filter plate/drain filter is
incorrectly inserted.
Detergent put in the
wrong compartment of
the dispenser.
Excess food not removed
from dinnerware prior to
loading.
Unsuitable detergent.
Not enough detergent.
Spray arm holes are
blocked.
Filter plate/drain filter is
blocked.
Wrong type of detergent
used
Incorrect amount of
detergent.
Too much egg in the
wash load.
Rinse aid setting too
high.
Rinse aid dispenser plug
not closed properly.
WHAT TO DO
See your 'Quick start guide' for a suitable
wash program, or the soils were too
heavily baked on and dishes may need
soaking.
Ensure no items are obstructing the spray
arm path.
Refer to the section on loading.
See section 'User maintenance
instructions'.
Detergent must be placed in the large
compartment. See section 'Adding
detergent' for information.
Scrape all food scraps off dinnerware prior
to loading.
Use detergents suitable for automatic
dishwashers. See section 'Adding
detergent' for examples of suitable and
unsuitable detergent types.
See section 'Wash programs and detergent
quantities' or follow the detergent
manufacturer's instructions.
Clean the spray arm.
Clean the filter plate and drain filter.
ONLY use detergents for Dishwashers.
See 'Adding detergent'.
See section 'Wash programs and detergent
quantities' or follow the detergent
manufacturer's instructions.
Increase the amount of detergent.
Decrease the rinse aid setting.
Ensure that the rinse aid dispenser plug
is closed tight, with its hand grip pointing
vertically. See section 'Using rinse aid'.