Scrolling The Theaterwide ®Picture; Usingthe Auto Aspectfeature - Toshiba 50L2300U User Manual

Setting upyourTV 71
Using the Auto Aspect feature
Scrolling t heTheaterWide ®picture (TheaterWide 2 and3
only)
You can set separate scroll settings for the TheaterWide 2 and
TheaterWide 3 modes for each input.
To set the scroll settings:
1 In the Picture Menu, highlight Display Settings, and then
press the ENTER button.
2 Highlight Picture Position, and then press the ENTER button.
(The Picture Position will be available when Picture Size is
TheaterWide 2 or TheaterWide 3.)
Reset Done
(Sample hnage) Picture menu - Theater Settings selection
3 The Picture Position screen will appear, press •]_ (arrow)
button to scroll the picture up and down as needed.
4 To save the new settings, highlight Done, and then press the
ENTER button.
To revert to the factory defaults, highlight Reset and then press
the ENTER button.
The adjustment range is from -5 to +10.
NOTE Whenreceiving asignalat480iresolution, t hepicture scrollfunction
mayhavelimitedadjustment r ange.
Using theAuto Aspect f eature
When this feature is set to On, the TV will automatically select the
picture size when one of the following input sources is received:
o:÷ A 480i, 480p, 720p, 1080i digital signal from the ANT/CABLE
input.
o1÷ 480i, 480p, 720p, 1080i, 1080p, or VGA (60Hz) signal from
the HDMI
TM
inputs.