Scrolling The Theaterwide Tm Picture; (Theaterwide 2 And 3 Only); Using The Auto Aspect Feature - Toshiba 23L1400UC User Manual

64
Setting up your TV

Using the Auto Aspect feature

Scrolling the TheaterWide
only)
You can set separate scroll settings for the TheaterWide 2 and
TheaterWide 3 modes for each input.
To set the scroll settings:
1 In the Picture Menu, highlight Display Settings, and then
press the ENTER button.
2 Highlight Picture Position, and then press the ENTER button.
(The Picture Position will be available when Picture Size is
TheaterWide 2 or TheaterWide 3.)
(Sample Image) Picture menu - Theater Settings selection
3 The Picture Position screen will appear, press ◄/►(arrow)
button to scroll the picture up and down as needed.
4 To save the new settings, highlight Done, and then press the
ENTER button.
To revert to the factory defaults, highlight Reset and then press
the ENTER button.
The adjustment range is from -5 to +10.
Using the Auto Aspect feature
When this feature is set to On, the TV will automatically select the
picture size when one of the following input sources is received:
A 480i, 480p, 720p, 1080i digital signal from the ANT/CABLE
v
input.
480i, 480p, 720p, 1080i, 1080p, or VGA (60Hz) signal from
v
the HDMI
TM
When receiving a signal at 480i resolution, the picture scroll function
may have limited adjustment range.
inputs.
®
picture (TheaterWide 2 and 3