Setting Theavinput M Ode - Toshiba 50L2300U User Manual

Setting upyourTV _J_
Setting the A V input mode
The list of channels appears.
(Sample Illustration) Channel Options
2 Press the A/V(arrow) buttons to select a channel position to be
skipped, and then press the ENTER button.
A check will appear in the box. To remove the check, press the
ENTER button again.
To add a channel to the channel memory:
o:o Highlight the checked box next to the channel number you
wish to add, and then press the ENTER button to remove the
check.
NOTE Youcanalsoblockspecific channels sothattheycannot b etuned
untilyouunlockthem.Forinformation, see"Locking channels" o n
page 87.
To manually add digital sub-channels on a physical channel:
Use the Channel Numbers and the (Dash 100) on the remote
control to enter the channel number (for example, 56-1).
If the channel is found, the number will be added to the list and
the box will be unchecked. If the channel is not found, a
message appears.
NOTE Skipped channels cannot b eselected w iththeCHA/v(arrow)
buttons; h owever, theycanbeaccessed u singthenumber k eysonthe
remote control.
Setting theAVinput m ode
This setting determines the configuration of the shared AV input on
your TV. You can set this input for either ColorStream HD or Video.
Add the following descriptions:
To set the AV Input mode: