Usingthe Hdmfmsettingsfeature; Hdmit M 1(2, Or 3) Rgbrange; Displayingtvstatus Information - Toshiba 50L2300U User Manual

102 Setting upyourTV
Displaying TVstatus information
Using theHDMI TM settings f eature
HDMI
TM
1(2, or3) RGBRange
You can select RGB range of HDMI inputs from the following
modes, as described below:
1 From the Options menu, highlight Input Options, and then
press the ENTER button.
2 Highlight HDMI 1(2, or 3) RGB Range and then press the
ENTER button.
Mode
Auto,default)
Full
Limited
Press the A/T (arrow) buttons to select Auto, Full, or Limited,
and then press the ENTER button.
Descrip_tion
_usts
RGB full range s_nal automaticall .y_:__
RGBinputsignalis _n therange from 0 to 255.
RGBinputsignalis displa_ed in therange from 16to 235.
The HDMF Msetting (RGB Range) needs proper HDMI
TM
source
devices. If your HDMI
TM
source device does not support these
features, the TV may not work properly when this feature is enabled.
HDMI
T M
Information Display
Viewing the HDMI
TM
signal information:
1 From the Options menu, highlight HDMI Information
Display, and then press the ENTER button.
2 Press the A/• (arrow) buttons to select On or Off, and then
press the ENTER button.
3 Press the INFO button. The normal banner and signal
information banner appear.
NOTE Thesignalinformation banner w ill appear w henthisfeature is setto
OnandyouwatchanHDMI
T M
input.
If youpresstheINFObutton whenthis feature is setto Off.onlythe
normal b anner w ill appear.
Displaying TVstatus information
To display TV status information using the RECALL button:
o:o Press the RECALL button on the remote control.
The following information will be displayed (if applicable):
o:° Current input (ANT/CABLE, Video, etc.)