Channel List; Selecting The Pc/Hdmi 1 Audio Mode; Setting The Hdmi 1 Audio Mode; Picture Adjustment - Toshiba 32P2300 Series Owner's Manual

Channel List

1
Press the LIST button.
The Channel List will appear.
2
Press  or  to select a channel, and press OK
to watch.

Selecting the PC/HDMI 1 Audio mode

You can select PC audio or HDMI audio when using
this function.
• Use the menus: PREFERENCES and AV
Connection
• Use the item: PC/HDMI 1 Audio
• Use the modes: PC and HDMI 1

Setting the HDMI 1 Audio mode

You can select sound of an HDMI or DVI device
connected to the HDMI 1 input terminals from three
modes: Auto, Digital or Analogue.
• Use the menus: PREFERENCES and AV
Connection
• Use the item: HDMI 1 Audio

Picture adjustment

Selecting the Picture Size
1
Press repeatedly to select the desired
Picture Size.
Native
This setting will display the image correctly without
distortion or picture clipping.
Wide
Use this setting when watching a wide-screen DVD,
widescreen video tape or a 16:9 broadcast (when
available). Due to the range of wide-screen formats
(16:9, 14:9, 20:9 etc.), you may see bars on the top
and bottom of the screen.
32P2300Series̲EN.indd 13 32P2300Series̲EN.indd 13
4:3
Use this setting to view a true 4:3 broadcast.
Super Live
This setting will enlarge a 4:3 image to fi t the screen
by stretching the image horizontally and vertically,
holding better proportions at the centre of the
image. Some distortion may occur.
PC Normal
Use this setting for PC connected via HDMI or RGB/
PC terminal when receiving PC signal format. This
setting will display the image correctly without
distortion or picture clipping.
PC Wide
Use this setting for PC connected via HDMI or RGB/
PC terminal when receiving PC signal format. This
setting will display the image without picture
clipping.
Dot by Dot
"Dot by Dot" is a non-scaling display. Depending on
the input signal format, the picture is displayed with
side panels and/or bars at the top and bottom (e.g.
VGA input source).
– 13 –
2013/03/19 19:43:41 2013/03/19 19:43:41