Advertisement
Using your StickMaster
Using the chopper attachment
1. P lace the chopper bowl on the non-slip
mat, ensuring the surface is clean and
level.
2. F it the stainless steel chopping blade into
the chopper bowl.
3. P lace food into the chopper bowl.
4. L ock the motor housing into the hole on
the top of the chopper attachment by
twisting motor housing and chopper bowl
lid until it locks into place. See Figure 3.
Figure 3
5. P lug the power cord into a 230-240 volt
power outlet and turn the power on.
6. H old the bowl with one hand while
operating the power button with the other.
Setting 'low' is low speed and setting 'high'
is high speed.
Ultra continued
®
To lock
Note: All stick mixers are designed to
operate only whilst the power buttons remain
depressed.
8. F or an extra boost of power during
operation, the turbo speed button (II) may
be depressed.
Note: The power button (I) should be released
when selecting the turbo speed button (II).
9. T o stop the stick mixer, take your finger off
the power button or turbo speed button.
10. Turn the power off at the power outlet
and unplug the power cord from outlet.
11. Unlock by twisting motor housing with
lid of chopper bowl until the two pieces
separate. See Figure 4.
To unlock
Figure 4
5
Advertisement
