ECS GeForce 6100PM-M2 Manual page 69

Installing the RAID Drivers
Your system may come with a Windows install CD that already includes NVIDIA
RAID drivers. If so, then this section is not relevant.
If that is not the case (or you are trying to install a new version of Windows), then
you will need an NVIDIA RAID driver F6 install floppy. Check to see if one came
with your system. If not, you can create one by downloading the appropriate driver
package and following the steps in this section.
1 Copy all files in "...\IDE\WinXP\sataraid" to a floppy disk. (For Windows
2000, substitute "Win2K" in the path.)
After you complete the RAID BIOS setup, boot from the Windows CD.
2
The Windows Setup program starts.
Press F6 and wait a few moments for the Windows Setup screen to
3
appear.
Figure 2.13
4 Specify the NVIDIA drivers.
a Insert the floppy that has the RAID driver, press S, then press Enter.
The following Windows Setup screen appears:
Figure 2.14 Windows Setup—Selected SCSI Adapter
NVIDIA RAID Configuration
Windows Setup—Specify Devices
63