Connecting I/O Devices - ECS GeForce 6100PM-M2 Manual

Connecting I/O Devices

The backplane of the motherboard has the following I/O ports:
PS2 Mouse
Use the upper PS/2 port to connect a PS/2 pointing device.
PS2 Keyboard Use the lower PS/2 port to connect a PS/2 keyboard.
Parallel Port
Use LPT to connect printers or other parallel communica-
(LPT) tions devices.
Serial Port
Use the COM port to connect serial devices such as mice or
fax/modems.
(COM1)
VGA1 Port
Connect your monitor to the VGA port.
USB Ports
Use the USB ports to connect USB devices.
.
LAN Port
Connect an RJ-45 jack to the LAN port to connect your
computer to the Network.
Use the three audio jacks to connect audio devices. The first
Audio Ports
jack is for stereo line-in signal. The second jack is for stero
(optional)
line-out signal. The third jack is for microphone.
This motherboard may adopt 8-channel audio ports that
correspond to the A,B, C, and E port respectively. In addi-
tion, all of the 3 ports, B, C, and E provide users with both
right & left channels individually. Users please refer to the
following note for specific port function definition.
A: Center & Woofer
B: Back Surround
C: Side Surround
The above port definition can be changed to audio input or
audio output by changing the driver utility setting.
This concludes Chapter 2. The next chapter covers the BIOS.
Installing the Motherboard
D: Line-in
E: Front Out
F: Mic_in Rear
25