Set Supervisor/User Password; Save & Exit Setup; Exit Without Saving - ECS GeForce 6100PM-M2 Manual

Set Supervisor/User Password

When this function is selected, the following message appears at the center of the
screen to assist you in creating a password.
Type the password, up to eight characters, and press <Enter>. The password
typed now will clear any previously entered password from CMOS memory. You
will be asked to confirm the password. Type the password again and press <Enter>.
You may also press <Esc> to abort the selection.
To disable password, just press <Enter> when you are prompted to enter password.
A message will confirm the password being disabled. Once the password is disabled,
the system will boot and you can enter BIOS Setup freely.
If you have selected "System" in "Security Option" of "BIOS Features Setup"
menu, you will be prompted for the password every time the system reboots or
any time you try to enter BIOS Setup.
If you have selected "Setup" at "Security Option" from "BIOS Features Setup"
menu, you will be prompted for the password only when you enter BIOS Setup.
Supervisor Password has higher priority than User Password. You can use
Supervisor Password when booting the system or entering BIOS Setup to modify
all settings. Also you can use User Password when booting the
system or entering BIOS Setup but can not modify any setting if Supervisor
Password is enabled.
Save & Exit Setup
Highlight this item and press <Enter> to save the changes that you have made in
the Setup Utility and exit the Setup Utility. When the Save and Exit dialog box
appears, press <Y> to save and exit, or press <N> to return to the main menu.

Exit Without Saving

Highlight this item and press <Enter> to discard any changes that you have made
in the Setup Utility and exit the Setup Utility. When the Exit Without Saving
dialog box appears, press <Y> to discard changes and exit, or press <N> to return
to the main menu.
If you have made settings that you do not want to save, use the
"Exit Without Saving" item and press <Y> to discard any changes
you have made.
This concludes Chapter 3. Refer to the next chapter for information on the software
supplied with the motherboard.
ENTER PASSWORD
PASSWORD DISABLED
Using BIOS
47