Ec Declaration Of Conformity - McCulloch 964830401 Owner's Manual

Husqvarna UK Ltd., Aycliffe Industrial Park
Newton Aycliffe, Co. Durham, DL5 6UP, England
Declare under our sole responsibility that the product(s);
Category............................ Chainsaw
Type(s) ............................ ES716, ES718, ES720, ES722
Identification of Series....... See Product Rating Label
Conforms to the essential requirements & provisions of the following EC Directives:
98/37/EC, 2004/108/EC, 2000/14/EC
based on the following EU harmonized standards applied:
EN50144-1, EN50144-2-13, EN ISO 11681-1, EN50366, EN55014-1, EN61000-3-2,
EN61000-3-3,
Notified Body that carried out the EC type-examination
in accordance with article 8 section 2c........................ TÜV Rheinland Product Safety
Certificate no. .............................................................
The maximum A weighted sound pressure level LpA at the operatorʼs position, recorded on
a sample of the above product(s) corresponds to the Level given in the table.
The maximum hand / arm vibration weighted value measured according to EN ISO 5349 on
a sample of the above product(s) corresponds to the Value given in the table.
2000/14/EC: The Measured Sound Power L
according to the tabulated figures.
Conformity Assessment Procedure................ Annex VI
Notified Body.................................................. Intertek, Cleeve Road
Newton Aycliffe 12/06/2007
M.Bowden
Research & Development Director
Husqvarna UK Ltd.
Type
Dry Weight (Kg)
Power (kW)
Oil tank volume (cm
Chain pitch (inches)
Chain gauge (mm)
Measured Sound Power L
Guaranteed Sound Power L
Sound pressure Level (dB(A))
Vibration Value Front handle (m/s
Vibration Value Rear handle (m/s
Minimum cable cross section (mm
Maximum cable length (m)
K. EC DECLARATION OF CONFORMITY
)
3
(dB(A))
WA
(dB(A))
WA
2 )
2 )
2
ENGLISH - 11
GmbH, 0197
Am Grauen Stein
D-51105 Köln, Germany
& Guaranteed Sound Power L
WA
Leatherhead, Surrey
KT22 7SB, England
ES 716 ES 718
4.2 4.3
1.65 1.8
115 115
3/8 3/8
1.3 1.3
106 106
106 106
97.6 99.7
3.56 3.52
3.68 3.72
) 1.0 1.0
30 30
values are
WA
ES 720 ES 722
4.4 4.4
2.0 2.2
115 115
3/8 3/8
1.3 1.3
107 109
107 109
99.8 99.2
3.55 3.69
3.91 4.2
1.0 1.0
30 30