Basic Operation; Turning On And Off The Main Power; Switching The Input Modes - Sharp LC-13SH6U Operation Manual

Basic Operation

Turning On and Off the Main Power

(POWER)
POWER indicator
Press POWER. The POWER indicator instantly changes
from red to green and the LCD TV set is turned on.
On-screen display
S T E R E O
S A P
M O N O M O N O
A
• The On-screen display disappears after a few seconds.
To turn off the main power, press POWER again.
Standby
To turn off the LCD TV set
Press POWER. The POWER indicator will turn red.
To turn the LCD TV set back on
Press POWER again. The POWER indicator will turn green.
ＬＣ－１３／１５／２０ＳＨ６Ｕ＿Ｅ＿Ｐ１１－１８．ｐ６５

Switching the Input Modes

(INPUT1/INPUT2/INPUT3/TV)
1
Turn on the power of the connected video equipment.
2
Press INPUT (
source. The screen changes in order of INPUT1,
INPUT2, INPUT3 and TV mode each time INPUT is
pressed.
2
1 1 : 5 3 A M
A
• INPUT1 :
Used for video equipment connected to the COMPONENT input
terminals.
• INPUT2 :
Used for video equipment connected to the INPUT2 terminal.
The S-video input terminal is additionally provided for the
INPUT2. If both the S-video terminal and normal video
terminals are connected with cables, the S-video input
terminal takes priority.
• INPUT3 :
INPUT3 mode is used to adjust the preset settings and IN or OUT
can be selected. INPUT3 indication is not displayed when OUT is
selected.
12
)/( ) to select the applicable input
INPUT1 mode
I N P U T 1
4 8 0 P
INPUT2 mode
I N P U T 2
INPUT3 mode
I N P U T 3
TV mode
2
2006.02.17, 10:03