Follow These Instructions - Asko T744C W Operating Instructions Manual

Hide thumbs Also See for T744C W:
Table of Contents

Advertisement

Reversing the door
You can choose whether the door is hung on the
right or the left.

Follow these instructions:

1. Remove the Toe kick.
2. Remove the hinge (two screws).
3. Lift the door up and remove it. Support the
door while doing this.
4. Remove both door pins (top and bottom).
Fit them on the other side of the machine.
Replace the hinge.
5. Loosen and remove the catch (lift up and pull
out) and the cover plate on the door and the
machine. Switch the catch and the cover plate.
1
2
6. Move the plastic plugs on the upper and lower
edges of the door. Use a flat screwdriver to
remove the plugs.
26
7. Refit the door by loosening the hinge screws
slightly, affixing the door, and closing it.
Tighten the hinges. Replace the Toe kick.
Customer Care Center
1-800-898-1879
www.askona.com

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

T754c w

Table of Contents