Mazda 2009 MX-5 Miata Owner's Manual page 293

4. Press the voice recognition/hands-free
switch with a short press.
5. The voice guidance reads out the voice
input command number (refer to the
voice input command list for voice
recognition learning). (Ex. Please read
phrase 1 )
6. Say: [Beep] 0123456789 (Say the
voice input command for voice
recognition learning (1 to 8) according
to the voice guidance.)
7. Prompt: Speaker enrollment is
complete, returning to main menu.
Voice input command list for voice
recognition learning
When reading out, the following points
must be observed:
Read out the numbers one at a time
l
correctly and naturally.
(For example, 1234 must be read out
one, two, three, four , not twelve, thirty
four .)
Do not read out parentheses. ( and
l
hyphens - are used for separating
numbers in a phone number.
Ex.
(888) 555-1212 must be spoken Eight,
eight, eight, five, five, five, one, two, one,
two.
Phrase
1 0123456789
2 (888) 555-1212
3 Call
4 Dial
5 Setup
6 Cancel
7 Continue
8 Help
Command
Bluetooth Hands-Free
NOTE
After user voice registration is completed,
voice guidance "Speaker enrollment is
complete, returning to main menu" is
announced.
qDTMF (dual tone multi-
frequency signal) transmission
This function is used when transmitting
DTMF via the user's voice. The receiver
of a DTMF transmission is generally a
home telephone answering machine or a
company's automated guidance call center
(When you send tone signals back
according to the voice guidance
recording).
1. Press the voice recognition/hands-free
switch with a short press.
2. Say: [Beep] XXXX... send (Say
DTMF code)
3. Prompt: Sending XXXX... (DTMF
code)
Interior Comfort
6-77