Mazda 2009 MX-5 Miata Owner's Manual page 275

CAUTION
Noise may occur during playback if
the accessory socket equipped on the
vehicle is used. (If noise occurs, do
not use the accessory socket.)
NOTE
Before using the auxiliary jack, read the
l
manufacturer's instructions for the product
being connected.
Use a commercially-available, non-
l
impedance (3.5
connecting the portable audio unit to the
auxiliary jack. Before using the auxiliary
jack, read the manufacture's instructions
for connecting a portable audio unit to the
auxiliary jack.
To prevent discharging of the battery, do
l
not use the auxiliary input for long periods
with the engine off or idling.
Noise may occur depending on the product
l
connected to the auxiliary jack.
With regard to connecting a portable audio
l
or similar device to a power source, use the
battery for the device, not the accessory
socket.
Insert the plug to the auxiliary jack
l
securely.
Insert or remove the plug with the plug
l
perpendicular to the auxiliary jack hole.
Insert or remove the plug by holding its
l
base.
To listen to a portable audio unit
1. Turn the ignition switch to the ACC or
ON position.
2. Insert the connection plug into the
auxiliary jack.
3. Press the power/volume dial to turn the
audio system on.
) stereo mini plug for
4. Press the AUX button (
audio unit or the mode switch (
of the audio control switches on the
steering wheel to change to the AUX
mode.
Audio Unit
NOTE
Set the volume of the portable audio unit to
l
the maximum within the range that the
sound does not become distorted, then
adjust the volume using the power/volume
dial of the audio unit or the volume switch
( , ) of the audio control switch.
Use your portable audio unit for operations
l
other than volume adjustment.
If the connection plug is pulled out from the
l
auxiliary jack while in AUX mode, noise
may occur.
Interior Comfort
Audio System
) of the
)
Audio Control
Switches
6-59