Mazda 2009 Mazda6 Owner's Manual page 288

Interior Comfort
Bluetooth Audio
4. Rotate the audio control dial to select
the information for the Bluetooth unit
which you would like to view.
NOTE
When "GO BACK" is selected, the display
returns to "DEVICE INFO".
5. When the audio control dial is pressed
the information is displayed.
qHow to use the Bluetooth Audio
system
Switching to Bluetooth audio mode
To listen music or voice audio recorded to
a Bluetooth audio device, switch to the
Bluetooth audio mode to operate the
audio device using the audio system or
navigation system control panels.
Any Bluetooth audio device must be
programmed to the vehicle's Bluetooth
unit before it can be used. (Refer to
"Bluetooth audio device programming")
1. Switch the ignition to ACC or ON.
6-70
Device name
BT address
2. Turn on the Bluetooth audio device's
power.
Make sure that the " " symbol is
displayed in the information display.
The symbol is not displayed if an
unprogrammed Bluetooth audio device
is being used or the vehicle's Bluetooth
unit has a malfunction.
3. Press the AUX button to switch the
Bluetooth audio mode to "BT".
4. The audio recorded to the Bluetooth
audio device begins playback.
NOTE
If the mode is switched from Bluetooth
l
audio mode to another mode (radio mode),
audio playback from the Bluetooth audio
device stops.
If a call is received on a hands-free mobile
l
phone during playback from the Bluetooth
audio device, the playback is stopped.
Playback from the Bluetooth audio device
resumes after the call ends.
Playback
1. To listen to a Bluetooth audio device
over the vehicle's speaker system,
switch the mode to Bluetooth audio
mode. (Refer to
"Switching to Bluetooth audio mode")
2. To stop playback, press the Play/Pause
( ) button.
3. Press the button again to resume
playback.
Selecting a file (track)
During playback
Short-press the track down button ( ):
Selects the beginning of the current file
(track).
Short-press the track up button ( ):
Selects the next file (track).