Mazda 2009 Mazda6 Owner's Manual page 225

This dial allows variable fan speeds.
0―Fan off
1―Low speed
2―Medium low speed
3―Medium high speed
4―High speed
Mode selector dial
Turn the mode selector dial to select
airflow mode (page 6-4).
NOTE
The mode selector dial can be set at the
l
intermediate positions (
mode. Set the dial to a intermediate
position if you want to slightly adjust the
airflow amount.
For example, when the mode selector dial is
l
at the position between the
positions, airflow from the floor vent is less
than that of the
í
A/C switch
Press the A/C switch to turn the air
conditioner on. The indicator light on the
switch will illuminate when the fan
control dial is set at position 1, 2, 3, or 4.
) between each
and
position.
Climate Control System
Press the switch once again to turn the air
conditioner off.
NOTE
The air conditioner may not function when
l
the outside temperature approaches 0 °C
(32 °F).
When the mode is set to
l
fan control dial in a position other than 0
and the temperature control dial in the
maximum cold position, the air intake
selector switches to the recirculated air
mode and the A/C turns on automatically.
If A/C is not desired, press the A/C switch
to turn it off.
If recirculated air mode is not desired,
press the air intake selector to switch to
outside air mode.
Air intake selector
This switch controls the source of air
entering the vehicle.
Press the switch to alternate
between the outside air and recirculated
air modes.
It is recommended that under normal
conditions the switch be kept in the
outside air mode.
Outside air mode (indicator light
turned off)
Outside air is taken into the vehicle. Use
this mode for normal ventilation and
heating.
Interior Comfort
or with the
í
6-7
Some models.