Table of Contents
Advertisement
Setting item
F3: A2 INPUT (audio input
2)
F5: A4 INPUT (audio input
4)
1) Only when HDSDI is selected as the video input.
Note
The signal name display flashes when the selected signal
is not being input. Input the selected signal, or select
another signal.
Page P1
Setting item
F1: CNTR SEL (counter
selection)
F2: MONI CH (monitor
channel)
F3: MONI SEL (monitor
selection)
F4: REC INH (recording
inhibit)
Description
Selects the audio input signals
assigned to audio channels 2
and 4.
HDSDI: Audio signal
multiplexed into HDSDI
1)
signal
ANALOG2: Analog 2 audio
signal
AES/EBU: Signals input to
DIGITAL AUDIO (AES/
EBU) INPUT 1/2 and 3/4
connectors
SG: Test signal from the
internal signal generator
Description
Selects the time data to display
in the time data display section.
TC: Timecode
UB: User bits
COUNTER: Elapsed recording
or playback time
Selects the audio channels to
monitor.
CH 1/2: Channels 1 and 2
CH 3/4: Channels 3 and 4
Selects the audio monitor
signal output from the AUDIO
MONITOR connector and the
PHONES jack.
STEREO: Assign the channels
selected with MONI CH to
left and right.
MONO L (monaural L
channel): Output one of
the channels selected with
MONI CH.
MONO R (monaural R
channel): Output one of
the channels selected with
MONI CH.
MIX: Output monaural audio
mixed from the channels
selected with MONI CH.
Turns recording inhibit mode
on and off.
ON: Recording inhibit mode on
OFF: Recording inhibit mode
off
Setting item
F5: CHAR SEL (Character
information display)
Page P2
Setting item
F1: TCG (timecode
generator)
Description
Turns the display of character
information in the monitor video
section of the LCD panel and
on an external monitor on and
off.
ON: Character information on
OFF: Character information off
LCD: Character information on
for the LCD panel only
When "ON" is selected, you
can turn the superimposition of
character information on and
off for the various output
connectors. To do so, set the
setup menu items DISPLAY
CONTROL >HD CHARA and
DISPLAY CONTROL >SD
CHARA (see page 78).
Description
Sets the operation of the
internal timecode generator.
INT (internal): The count value
advances from a preset
initial value, or advances
consecutively from the
timecode of the last frame
recorded on the disc.
EXT (external): Synchronize
to the timecode input to the
TIME CODE IN connector.
SDI: Synchronize to the
timecode of the signal
input to the HDSDI
connector.
Function Menu
73
Advertisement
Table of Contents
