IBM Thinkpad TransNote Service And Troubleshooting Manual page 25

3. As soon as the IBM ThinkPad opening screen appears, press F1. After
4. Select Password, using the cursor directional keys to move down the
5. Select Hard Disk x Password, where x is the letter of the hard disk drive
6. A password window opens. You are prompted to select User only or
7. If you select Master + User, go to step 10.
8. If you select User only, a new-password window opens. Choose a user
9. Press the down arrow key once to move to the next line. Retype the
10. If you select Master + User, a message window opens and prompts you
11. The user password window opens. Choose the user password you want,
12. Press the Enter key once to move to the next line. Retype the password
13. A message window opens and prompts you to set the master hard disk
14. A new master hard disk window opens. Choose the master hard disk
15. Press the Enter key once to move to the next line. Retype the password
16. Commit any password to memory.
16
®
ThinkPad TransNote
several seconds, the BIOS Setup Utility screen opens.
menu.
for which you want to set a password.
Master + User. Select User if you want to set only one hard disk
password. If you are an administrator or a supervisor, you can select
Master + User to set two passwords. (The user can change the user
password later.)
hard disk password, which can be from one to seven characters in any
combination. Type it in the Enter New Password field.
password you just entered, to verify it. Go to step 16 to complete the
procedure.
to set up a user hard disk password first. Select Continue.
which can be from one to seven characters in any combination. Type it in
the Enter New Password field.
you just entered, to verify it.
password. Select Continue.
password you want, which can be from one to seven characters in any
combination. Type it in the Enter New Password field.
you just entered, to verify it.
™
Service and Troubleshooting Guide