Mitel 3100 Expansion Installation Instructions

M N
ITEL ETWORKS
Package Contents
Your Mitel Networks 3100 ICP Expansion package contains the following items:
•
Mitel Networks 3100 ICP Expansion Unit;
•
Documentation Pack;
•
Quick Reference Cards;
•
Expansion Uplink Kit (uplink card, 2 pillars, 3 screws (M3), uplink plate);
•
Rack Mounting/Wall Mounting Kit (2 wall brackets, 2 rack brackets, 4 screws (M4), 4 stacking feet, 4 screws (M3.5), 2 screws (#10),
4 cage nuts, 4 screws (M5), 2 wall plugs);
•
Expansion cable;
•
Y Power Cord.
Tools Required
•
Screwdriver (No.1, 2);
•
Nut Driver (5.5mm (7/32 inches) A/F).
Safety Information
WARNING: REFER TO THE IMPORTANT SAFETY INFORMATION SHEET PROVIDED, BEFORE PROCEEDING.
Environmental Restrictions
Operating Range
Storage and Transport Range
CAUTION: The Uplink card MUST be fitted in the Controller before proceeding with the installation of the Expansion.
Installing Uplink Card
WARNING: BEFORE COMMENCING THIS INSTALLATION, DISCONNECT THE POWER AND ALL CONNECTIONS TO THE PUBLIC
WARNING: BEFORE ATTEMPTING THIS SERVICE OPERATION, THE PERSON PERFORMING THE INSTALLATION SHOULD
WARNING: THE INSTALLER OF THE OPTION MODULE(S) IS ASSUMED TO HAVE A BASIC UNDERSTANDING OF THE OPERATION
CAUTION: When removing case top please lift from front edge to avoid damaging the facia.
Issue 3 June 2001
56001370
3100 I
NTEGRATED
E I
XPANSION NSTALLATION
Temperature + 0°C/+32°F min
Humidity 10-85% relative humidity
Air Pressure 70 k pa min
Temperature -20°C/-4°F min
Humidity 5-95 % relative humidity
Air Pressure 70 k pa min
TELECOMMUNICATIONS NETWORK. FAILURE TO DO THIS COULD LEAD TO A POTENTIALLY HAZARDOUS
SITUATION WHICH COULD RESULT IN DEATH OR SERIOUS INJURY.
ENSURE THAT THEY ARE SUITABLY QUALIFIED, FULLY AWARE OF THE SAFETY REQUIREMENTS CONTAINED IN
THE TECHNICAL MANUAL AND THAT THEY FULLY UNDERSTAND THEIR FULL IMPLICATIONS.
OF THE SYSTEM. IF IN DOUBT SEEK ADVICE FROM A QUALIFIED PERSON.
C
OMMUNICATIONS
I
NSTRUCTIONS
+40°C/+104°F max
-3
1.5-25 gm ABS
106 k pa max
+50°C/+122°F max
-3
0.5-30 gm ABS
106 k pa max
P (ICP)
LATFORM