Table of Contents
Advertisement
Horizontal adjustment
1. Lift out the shoe rack.
2. Control that surfaces are horizontal by
placing a bubble level parallel to the walls
and parallel to the back and the door.
3. Use the Allen wrench provided, and cor-
rect the position of all four adjustable feet
through the holes in the base plate of the
drying cabinet (use pliers if necessary).
4. Press the four protective caps down firmly
into the holes.
Mounting
1. Take out the upper hanging section and
mark the centres of the holes on the woo-
den strip (see the section "Installing in
the cabinet mounting unit") or on the wall
behind the drying cabinet.
2. Pre-drill the holes in the spacer bead for
the attachment screws.
3. Fix the cabinet in place using the provided
screws with their matching washers.
4. In the same way, fix the protective caps
provided over the screw heads.
1.
Pre-drilled hole
2.
2 attachment screws with washers
14
1
2
1.
Shoe rack
2.
Bubble level
3.
Allen wrench
WARNING
The cabinet should not be used without
being screwed to the wall.
1
3
2
Advertisement
Table of Contents
