1. Before You Start Package Contents Ÿ TV-IP121WN Ÿ CD-ROM (Utility and User's Guide) Ÿ Multi-Language Quick Installation Guide Ÿ 1 x 2dbi Detachable Antenna Ÿ Network Cable (1.5m/5ft.) Ÿ Mounting Kit Ÿ Power Adapter (5V DC 2.5A or 1.2A) If any of the above contents are missing, please contact your reseller.
2. Hardware Installation 1. Attach the antenna to the IP Camera. 2. Connect a RJ-45 network cable from a Switch/Router to the Ethernet port on the IP Camera. 3. Connect the Power Adapter to the IP Camera and then to a power outlet. 4.
Page 4
Verify that the MAC address listed matches the IP address on your IP camera. The MAC address is listed on the bottom of the TV-IP121WN. Click Search if no cameras are detected. 3. Follow the Installation Wizard instructions. 4. Once installation is complete click Close.
Page 5
Then plug the control. power back in. 9. Click Setup, Network and then Note: The TV-IP121WN will not work click Wireless. wirelessly until you disconnect the network cable from the back of the camera. 12. Verify the Power (Amber) and Link (Green/Blinking) LEDs are on.