Epson Research and Development
Vancouver Design Center
1 Introduction
Interfacing to 8-bit Processors
Issue Date: 01/02/23
This application note describes the hardware and software environment required to
interface the S1D13706 Embedded Memory LCD Controller and 8-bit processors. This
document is not intended to cover all possible implementation, but provides a generic
example of how such an interface can be accomplished.
The designs described in this document are presented only as examples of how such
interfaces might be implemented. This application note is updated as appropriate. Please
check the Epson Electronics America website at http://www.eea.epson.com for the latest
revision of this document before beginning any development.
We appreciate your comments on our documentation. Please contact us via email at
documentation@erd.epson.com.
Page 7
S1D13706
X31B-G-015-02