Preferences Tab - Epson S1D13706 Technical Manual

Epson Research and Development
Vancouver Design Center

Preferences Tab

Panel SwivelView
S/W Invert Enable
H/W Invert Enable
13706CFG Configuration Program
Issue Date: 01/03/29
The Preference tab contains settings pertaining to the initial display state. During runtime
these settings may be changed.
Panel SwivelView
Panel Invert
S/W Invert Enable
H/W Invert Enable
Panel Color Depth
The S1D13706 SwivelView feature is capable of
rotating the image displayed on an LCD panel 90°,
180°, or 270° in a counter-clockwise direction. This sets
the initial orientation of the panel.
The S1D13706 can invert the display data going to the
LCD panel. The display data is inverted after the Look-
Up Table.
The Video Invert feature can be controlled by software
using REG[70h] bit 4. When this box is checked, the
Software Video Invert bit is set to one and video data is
inverted. If the box is unchecked, the bit is set to zero
and video data remains normal.
The Video Invert feature can be controlled by hardware
if the GPIO0 is available. Hardware control is not
possible if a HR-TFT or D-TFD panel is used as both
panels use GPIO0 as an LCD control signal.
Sets the initial color depth on the LCD panel.
Page 9
Panel SwivelView
S1D13706
X31B-B-001-03