Clock Function; Timer Setting; Timer Function - Kenwood TH-78A Instruction Manual

CLOCK FUNCTION

If you press the F key, then the 7 key in receive mode, the clock is displayed on the Sub band display. The time is
displayed on a 24-hour basis. If you press the F key, then the 7 key again, the clock is canceled, and the normal
frequency display returns.
1 Time Setting
1 Press and hold the F key for longer than one second, then press the 7 key. The clock is displayed on the Main
band display.
2 Set the "Hour" display to the current hour with the Tuning control.
Press the M key.
3
4 Set the "Minute" display to the current minute with the Tuning control.
Press the F key.
5
2

Timer Function

Switch-ON Timer Setting
1 If you press and hold the F key for longer than one second, then press the 8 key, you enter the switch-ON
timer setting mode, and the TIMER ON indicator and the "Hour" display will flash.
2 With the Tuning control, set the "Hour" display to the time you want the transceiver to turn on.
Press the M key.
3
4 With the Tuning control, set the "Minute" display to the time you want the transceiver to turn on.
Press the F key.
5
Switch-OFF Timer Setting
If you press and hold the F key for longer than one second, then press the 9 key, you enter the switch-OFF
1
timer setting mode, and the TIMER OFF indicator and the "Hour" display will flash.
Page 44