Receive Message Memory - Kenwood TH-78A Instruction Manual

2) The MESSAGE display lights, and you can now receive a message. When a message is received, it is
displayed, and the MESSAGE indicator flashes.
•
DTSS mode
•
Paging mode
6

Receive Message Memory

This transceiver has 10 incoming message memory channels, in which received messages are stored.
If you press the MESSAGE key in the message mode, the last stored message is displayed.
You can store your message in memory using one of the following two methods. You can select the desired mode.
•
If there is data in all 10 message memory channels, new data is written into channel 0 (Factory default).
•
If data is stored in all 10 message memory channels, new data is not written into any channel.
Press and hold the MESSAGE key, and switch the power on to change this function.
Receive message memory clear
Press any key
Page 38