Dtmf Memory - Kenwood TH-78A Instruction Manual

3) Release the 2 key.
You are now able to enter numbers without pressing and holding the PTT switch.
Repeat 1 and 3 to cancel the delay time.
8

DTMF Memory

You can store 10 DTMF telephone numbers up to a maximum of 15 digits long in memory.
Storing DTMF Codes
1) Press the M key, then press the MHz key to select the DTMF code entry mode.
2) Enter the DTMF code on the keyboard.
3) Press the MR key after entering the DTMF code.
4) Select the channel (0~9) where you want to store the DTMF code and press the key for that channel. The
DTMF code is stored and the previously displayed frequency reappears.
5) If you enter the wrong number, press the VFO key to start over from step 1.
6) To stop during entry, press the BAND key. The previously displayed frequency appears on the display.
Recalling Stored DTMF Codes in Receive Mode'
1) Press and hold the F key for longer than one second, then press the MHz key.
2) Press a number (0~9). The correspondinh stored DTMF code is displayed.
Making a DTMF Call
1) Hold the PTT switch and press the MHz key.
2) Press a number key (0~9) for the channel where the DTMF code is stored.
Page 27