Table of Contents
Advertisement
Table 1: Required and supplementary documentation
Title
Order confirmation
Contains the order-related technical data of your axial piston variable pump
A15VO/A15VLO.
Installation drawing
Contains the outer dimensions, all connections and the hydraulic circuit diagram
for your axial piston variable pump A15VO/A15VLO.
Axial piston variable pump A15V(L)O
Contains the permissible technical data, ports, main dimensions and circuit
diagrams of standard versions.
Hydraulic fluids based on mineral oils and related hydrocarbons
Describes the requirements for mineral oil-based hydraulic fluids and related
hydrocarbons for operation with Rexroth hydraulic components and provides
support for selection of suitable hydraulic fluids for the hydraulic system.
Environmentally acceptable hydraulic fluids
Describes the requirements for environmentally acceptable hydraulic fluids on
mineral oil basis and related hydrocarbons for operation with Rexroth hydraulic
components, and provides support for selection of suitable hydraulic fluids for
the hydraulic system.
Fire-resistant, water-free hydraulic fluids (HFDR/HFDU)
Describes the requirements on fire-resistant, water-free hydraulic fluids
(HFDR/HFDU) for operation with Rexroth hydraulic components and assists
you in selecting a hydraulic fluid for your hydraulic system.
Bosch Rexroth Fluid Rating List for Rexroth hydraulic components
(pumps and motors)
Contains the hydraulic fluids positively evaluated by Bosch Rexroth.
Information on the application of hydrostatic drives at low temperatures
Contains additional information on the application of Rexroth axial piston units
at low temperatures.
Storage and preservation of axial piston units
Contains additional information on storage and preservation.
About this documentation | A15VO/A15VLO series 12
1 About this documentation
1�1 Validity of the documentation
This documentation applies to the following products:
• Axial piston variable pump A15VO series 12
• Axial piston variable pump A15VLO series 12 (version with charge pump)
This documentation is intended for machine/system manufacturers,
assemblers and service engineers.
This documentation contains important information on the safe and proper
transport, assembly, commissioning, operation, maintenance, removal and simple
troubleshooting of the axial piston unit.
▶ Read this documentation completely, in particular chapter 2
"Safety instructions" on page 8 and chapter 3 "General instructions on
property damage and product damage" on page 15 before you start work
with the axial piston unit.
1�2 Required and supplementary documentation
▶ Only commission the axial piston unit if the documentation marked with the
book symbol
is available to you and you have understood and observed it.
Document number
Document type
–
Order confirmation
Please request the
Installation drawing
installation drawing
from your contact at
Bosch Rexroth.
92512
Data sheet
90220
Data sheet
90221
Data sheet
90222
Data sheet
90245
Data sheet
90300-03-B
Manual
90312
Data sheet
RE 92512-01-B/2023-03-27, Bosch Rexroth AG
5/60
Advertisement
Table of Contents
