Table of Contents
Advertisement
34/60
A15VO/A15VLO series 12 | Installation
Bosch Rexroth AG, RE 92512-01-B/2023-03-27
3
X (LRDRS.)
(Y D2)
Fig� 9: Removing transport protection
1 Protective cover
2 Threaded plugs
3 Protective plug
4 Steel flange covers (the flange
cover on the suction port provides
a secure stand and protection
for the V
stop)
g max
Ports intended for connecting lines come with protective plugs and/or threaded
plugs, which serve as transport protection. Connect all ports required for
functional operation (see Table 9 "Ports A15VO/A15VLO series 12" on page 38).
Non-compliance could lead to malfunctions or damage. If a port is not being
used, plug it with a threaded plug since the protective plugs are not pressure-
resistant.
Important for D2 controllers! Port Y is equipped with a protective plug (3).
This port must be connected. Non-compliance could lead to malfunctions or
damage.
Important for LRDRS. controllers! Port X is equipped with a protective
plug (3). This port must be connected. Non-compliance could lead to
malfunctions or damage.
You will find other ports for the respective control in the data sheet 92512�
2
1
5
4
or
4
5 For version with through drive,
protective cover and mounting bolts
Advertisement
Table of Contents
