Advertisement
➢ "DEFROST"
You can enter the DEFROST phase by switching
the corresponding key.
Defrost phase is useful during night time;
normally a lower rotation speed is set, with a
higher temperature, in order to reduce the
power consumption though keeping the product
cold and preserving it from deterioration.
Defrost phase is recognizable because the
corresponding key is selected on the menu
(and, consequently has a different color, see
fig.27). To exit this phase you have to switch
again the key.
At the end of DEFROST phase, it's assumed that
the product has to be again prepared for
dispensing, so the machine automatically enters
into preparation phase, that can be identified by
the "------" key present on extraction key.
"CONSERVATION" PHASE
Machine enters the conservation phase at the
end of the preparation time or if you switch the
dispensing key.
This phase is the standard one for the machine
and it has the purpose to maintain the product
consistency and temperature right to be
dispensed.
The pre-set parameters are related to the
conservation phase, it means rotation speed and
temperature.
During this phase the DISPENSING KEY is well
plain (fig.28).
Edition: 05/02/2024
Release: 0
Fig. 27
Fig. 28
Pag. : 17/36
Advertisement
