Advertisement
L
-
ubricate the rear of the tank where it meets
with the seal to facilitate the reassembling
procedures (see fig.15);
R
-
eassemble the bowl by positioning it back
into its seat, verifying that it faces in the correct
direction and it is held in place by its seal (see
fig.16).
F
-
ix the bowl by reinsert the knobs (fig.17).
IMPORTANT
D
o not over tighten the bowl knobs.
E
xcessive force could damage the thread
and/or the bowl itself.
R
-
e-insert the tap (fig.18) spreading Vaseline
on the o-rings to facilitate sliding the tap in its
seat until completely inserted.
!Warning!
I
f the tap does not perfectly slide into position,
the sealing hold will be endangered.
R
-
eassemble the accessory to give a "star"
peculiar shape to the dispensed product.
R
-
eassemble the drip tray.
Edition: 05/02/2024
Release: 0
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Pag. : 10/36
Advertisement
