Haier AB36NACBEA Service Manual page 66

Fan Operation
A
U
T
O
TEMP
ON
OFF
4
SWING
1
MODE SLEEP
HEALTH FRESH
2
CLOCK SET
TIMER HIGH/SO
FILTER
LIGHT LOCK
RESET CODE
1.Unit start
Press ON/OFF button to start your air conditioner.
Previous operation status appears on LCD (except for
TIMER, SLEEP, and SWING setting).
2.Select operating mode
Press MODE button. At each press, operation mode
changes as follows:
A
Then select FAN
3. Adjust fan speed
Press FAN button. At each press, fan speed changes as
FAN
follows:
3
Air conditioner will run at the selected fan speed.
When in AUTO mode, unit will adjust fan speed
according to room temperature automatically.
4. Unit stop
Press ON/OFF button to stop unit.
About FAN mode
When the air conditioner runs in FAN mode,
it is not possible to select AUTO FAN or to
set temperature.
COOL
AUTO
LOW
MID
DRY HEAT FAN
HIGH