Power By Midspan; Recommendations For Third-Party Ieee 802.3Bt Poe Power Supply - Bosch AUTODOME 7100i Installation Manual

AUTODOME 7100i│AUTODOME 7100i IR
10.2

Power by midspan

10.2.1

Recommendations for third-party IEEE 802.3bt PoE Power Supply

Bosch recommends the use of one of the IEEE 802.3bt Type 3, Class 6 midspans (Refer to
the subchapter Connecting the AUTODOME camera to the PC in the Installation Manual) for
use with the non-IR AUTODOME camera model and one of the IEEE 802.3bt Type 4, Class 8
midspans (Refer to the subchapter Connecting the AUTODOME camera to the PC in the
Installation Manual) for use with the AUTODOME IR camera models. By using them, you
make sure to meet all AUTODOME specifications and access to all features.
In general, you can use a third-party IEEE 802.3bt Type 3, Class 6 compliant midspan (Refer
to the subchapter Connecting the AUTODOME camera to the PC in the Installation Manual)
or PSE with the non-IR AUTODOME camera model and a third-party IEEE 802.3bt Type 4,
Class 8 compliant midspan (Refer to the subchapter Connecting the AUTODOME camera to
the PC in the Installation Manual) or PSE with the AUTODOME IR camera models, as long as
it meets the power requirements as in the table that follows.
2MP (non-
2MP IR, 4K
Warning!
The product should be supplied only by an external power supply that is a certified Class 2
!
or Limited Power Source (LPS) supply.
It must be an electrically Earth-grounded metal box with a watertight, electrically grounded
metal conduit that is connected between the box and the AUTODOME camera.
The power redundancy feature is only guaranteed to work with Bosch midspans mentioned
on the AUTODOME camera datasheet since it depends on other power supply features
beyond the IEEE 802.3bt standard.
It is recommended that any third-party IEEE 802.3bt midspan support a retry feature if there
is a momentary over-current.
Note: For the system of the AUTODOME camera and the chosen power device (third-party
IEEE 802.3bt midspan or 24 VAC) to meet all of the AUTODOME certifications and
specifications, the midspan/power supply must meet the same certifications and
requirements.
Bosch Security Systems
Model Minimum current output required
24 VAC,
50/60 Hz
3
IR)
3.5
IR
(Amps)
PoE 54 36 VDC
VDC
0.9 1.3
1.2 1.85
Installation Manual
Connection | en
Minimum power output required
(Watts)
24 VAC, PoE 54
50/60 Hz VDC
(PF = 0.6)
43.2 48.6
53 64.8
2023-09-29 | V06 | F.01U.410.315
47
36 VDC
46.8
66.6