Table of Contents
Advertisement
28
en | Installing a pendant arm mount
Warning!
Serious injury or death can occur if the hinge pins of the Pendant Arm are not fully engaged
!
(locked) to the Power Supply Box. Exercise caution before releasing the Pendant Arm.
7.
8.
9.
2023-09-29 | V06 | F.01U.410.315
Put the appropriate cables for power, video, alarms, and audio through one of the
access holes in the power suply box. Note: Use the proper grommets in order to
guarantee an IP66 rating.
Use a screwdriver to install a grounding screw on the grounding connection point in the
power supply box, then connect the ground wire, as in the figure that follows.
Tighten the screws to 10-12 Nm.
Installation Manual
AUTODOME 7100i│AUTODOME 7100i IR
Bosch Security Systems
Advertisement
Table of Contents
