Table of Contents
Advertisement
AUTODOME 7100i│AUTODOME 7100i IR
For audio and/or alarm inputs/outputs (I/O):
1.
Notice!
Notice
Use shielded twisted pair wire for all the connections such as a Belden cable with a foil
shield:
One shielded cable for 24VAC or 36VDC and GND
i
2nd shielded cable for
- ALARM1 and DGND
- ALARM 2 and DGND
- RELAY-NO and RELAY-COM
- RELAY-NC and RELAY-COM
- AUDIO-IN+ and AUDIO-IN-
- AUDIO-OUT+ and AUDIO-OUT-
Notice!
i
Notice
The foil shield of the above two cables should be connected to the chassis ground
Notice!
i
Notice
The Ethernet cable should be CAT 5E, CAT 6 or better.
2.
Bosch Security Systems
On the mount on the camera side, connect the drain wire of the Belden cable (or
similar cable) to chassis ground and grounded metal box.
Connect the other end of the drain wire to a grounded metal box that contains the
audio and alarm equipment that supports electrically grounded conduit.
X104
X105
X106
Installation Manual
Installing a pendant arm mount | en
2023-09-29 | V06 | F.01U.410.315
31
Advertisement
Table of Contents
