AUTODOME 7100i│AUTODOME 7100i IR
–
–
–
Figure 10.1: System Configuration with AUTODOME camera
1
2
3
4
Bosch Security Systems
a dedicated IEEE 802.3 1000Base-T, or 100Base-TX Ethernet network switch, and then
connect the dedicated network switch to the RJ45 connector on the PC, to bypass the
Local Area Network (LAN). (See the top graphic in the first figure that follows.)
a PC, using an Ethernet crossover cable with RJ45 connectors. (See the bottom graphic
in the first figure that follows.)
a midspan from Bosch that meets the IEEE 802.3bt, Type 3/4 (60W/90W) standard (See
the second figure that follows.)
Note: midspans from Bosch with IEEE 802.3at or IEEE 802.3af are not compatible.)
AUTODOME camera
IP Connection
Network Switch
Computer
Installation Manual
Connection | en
2023-09-29 | V06 | F.01U.410.315
45