Kenwood NEXEDGE NX-200 Function Reference page 503

20 OPTIONAL BOARD
20.2 VGS-1
Note
• The recorded time and recording type (AR, VM, RM) is voiced using Voice Guide when 500 ms has elapsed after the recorded data
was selected. (Refer to Using the Voice Guide (Voice Guide) on page
• If Voice Guide is activated, the display will scroll. The recorded data is played back when Voice Guide finishes.
• When the transceiver finishes playing back a recorded data entry, the transceiver automatically starts playing back the next recorded
data entry.
• If an error occurs while recording data, "VGS ERROR" appears for 1 sec if the data is selected and the transceiver automatically
retrieves the next piece of recorded data.
 Rewinding or fast-forwarding the audio data recorded using Auto Recording
1
Press the Left or Right/Home
If the Left key is pressed, the transceiver reverts back to the
recorded data from 5 sec previous, and then the transceiver plays
the data. If there is no audio data to be played from 5 sec
previous, the transceiver starts playing back from the beginning
of the current recorded data.
Pressing the Right/Home key fast-forwards the current data for 5
sec, and then the transceiver plays back. If there is no audio data
to be played back when the data is fast-forwarded for 5 sec, the
transceiver starts playing back the next piece of recorded data.
 Storing the SRAM audio data recorded using Auto Recording to the flash memory of the VGS-1
1
Play back the data in the SRAM recorded using Auto Recording.
2
Press the Side 2 key (NX-200/ NX-210/ NX-300/ NX-410/ NX-411) or the
The audio data recorded in the SRAM of the VGS-1 is written to
the Flash Memory of the VGS-1.
FUNC (K)/Ver 4.00
470.)
key while the data recorded using Auto Recording is played back.
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
Square key (Mobile).
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
CONTENTS INDEX 469