Kenwood NEXEDGE NX-200 Function Reference page 159

8 NXDN CONVENTIONAL SYSTEM
8.4 Using NXDN ID to Initiate a Selective Call
Transmission
Individual (NXDN) key
Side 1
or
Right/Home key
*1
,
Side 1
*2
,
Triangle
or
Right/Home key
Group (NXDN) key
Side 1
or
Right/Home key
*1
,
Side 1
*2
,
Triangle
or
Right/Home key
*1 NX-200/ NX-210/ NX-300/ NX-410/ NX-411
*2 Mobile
In Individual Call Mode, a Unit ID of the target transceiver can be selected from the Unit ID List or a Unit ID can directly be
entered. Also, in Status Mode, a status to be sent can be selected from the Status List or the status can directly be entered.
In either mode, the entry method can be changed by a user pressing and holding the Menu ([
Left key can also switch the entry method.
Reception
FUNC (K)/Ver 4.00
Individual + Status
(NXDN) key
Individual Call Mode
*1 *2
Menu ([ ]) or [*]
, Triangle ,
key
Status Mode
*1
, Triangle
Side 1
or
Right/Home key
Group + Status
(NXDN) key
Group Call Mode
*1 *2 Menu ([ ]) or [*]
, Triangle ,
key
Status Mode
*1
, Triangle
Side 1
or
Right/Home key
Press and hold the
Menu ([ ]) or [*] key,
or press the Left key.
* If Manual Dialing = Check is enabled.
Press any key.
Each Receive Mode
Normal Mode
Status (FleetSync/NXDN) key
Status Mode Individual Call Mode
*1
,
Side 1
*2
,
Triangle
or
Right/Home key
Short Message Mode
*2
,
Normal Mode
Group Call Mode
(Only for NXDN
Trunking System)
Short Message Mode
*2
,
Status Mode
Status List selection
Press and hold the
Menu ([ ]) or [*] key,
or press the Left key.
* If Manual Dialing = Check is enabled.
Normal Mode
Receiving an Individual Call,
a Group Call, a Status Message
or a Short Message.
SDM
Individual + SDM (NXDN) key
(FleetSync/NXDN)
key
Short Message Mode
*1
, Triangle
Side 1
Menu ([ ]) or [*]
Menu ([
key
*1 *2
, Triangle ,
Side 1
Menu ([ ]) or [*] key
Group + SDM (NXDN) key
(Only for NXDN
Trunking System)
Menu ([ ]) or [*]
key
*1 *2
, Triangle ,
Side 1
Menu ([ ]) or [*] key
]) or [*] key. Pressing the
CONTENTS INDEX
*2
,
]) or [*] key
125