Bosch BDU314Y Owner's Manual page 295

English – 14
– The eBike is stationary.
– The smartphone is connected to the Internet.
– The eBike battery is sufficiently charged, and the
charging cable is not connected.
You can set up <eBike Lock> in the eBike Flow app
under the <Settings> menu item.
You can deactivate the support of your drive unit with
immediate effect by switching on <eBike Lock> in
the eBike Flow app. Deactivation can only be can-
celed if your smartphone is nearby when switching on
the eBike. Your smartphone must have Bluetooth®
switched on for this, and the eBike Flow app must be
active in the background. The eBike Flow app does
not have to be opened. If <eBike Lock> is activated,
you can also use your eBike without support from the
drive unit.
Compatibility
<eBike Lock> is compatible with these Bosch eBike
product lines from the system generation the smart
system:
Drive unit
BDU374x
BDU33xx
BDU31xx
How it works
In conjunction with <eBike Lock>, the smartphone
works in a similar way to a key for the drive unit.
The <eBike Lock> is activated by switching off the
eBike. As long as the <eBike Lock> is active after the
function is switched on, this will be indicated by
the System Controller control unit flashing white and
by a padlock symbol on the on-board computer.
Note: <eBike Lock> alone does not provide ade-
quate theft protection; it is simply a supplement to a
mechanical lock. <eBike Lock> does not provide any
form of mechanical lock for the eBike. Only the assis-
tance from the drive unit is deactivated. As long as
0 275 U07 3RC | (23.03.2023)
Product line
Performance Line CX
Performance Line
Active Line
Active Line Plus
Performance Line SX
the smartphone is connected with the eBike via
Bluetooth®, the drive unit is unlocked.
If you wish to give other users temporary or per-
manent access to your eBike or you want to take
your eBike to a service, you will need to deactivate
the <eBike Lock> in the eBike Flow app in
the <Settings> menu item. If you wish to sell your
eBike, you will also need to delete the eBike from
your user account in the eBike Flow app in the <Set-
tings> menu item.
When the eBike is switched off, the drive unit will
emit a "Lock" sound (i.e. an audio signal that is played
once) to indicate that the assistance from the drive
unit is switched off.
Note: The audio signal will only be played if the eBike
is switched on.
When the eBike is switched on, the drive unit will emit
two "Unlock" sounds (i.e. an audio signal that is
played twice) to indicate that the assistance from the
drive unit is enabled again.
The "Lock" sound helps you to recognize whether
<eBike Lock> is activated on your eBike. The audio
signal is activated by default, but it can be deacti-
vated in the eBike Flow app in the <Settings> menu
item by selecting the lock symbol under your eBike.
Note: If you are no longer able to set up or switch off
<eBike Lock>, please contact your bicycle dealer.
Replacing eBike components and <eBike Lock>
Replacing the smartphone
1. Install the eBike Flow app on the new smart-
phone.
2. Log in using the same account with which you acti-
vated <eBike Lock>.
3. <eBike Lock> is displayed as set up in the eBike
Flow app.
Replacing the drive unit
1. <eBike Lock> is displayed as deactivated in the
eBike Flow app.
2. Activate <eBike Lock> by pushing the <eBike
Lock> control unit to the right.
Bosch eBike Systems