30
Screen
6
Overview of SFE tool
en
Desktop software: SFE tool as a file for download
Action steps
Select a port.
Navigate to the Settings (1) tab.
Select COM port (2).
When selecting, be aware that a different
port applies depending on the device.
Set the Baudrate to Auto (3).
Click Connect (4).
Note
The CRC check of the commands is
activated by default. This setting can be
retained.
If the connection was successful, the color
of the writing under "CONNECTION STATE"
"Connected – Version xyz" changes to
green.
The baud rate is adjusted automatically.
New functions are available on the left hand
side.
Open the function bar via the list symbol on
the top left.
5