Table of Contents
Advertisement
11
2.2
Improper use
Using the product in any other way than as described under "Intended use" is considered to be misuse
and is therefore not permitted.
Bosch Rexroth AG will not accept any liability for injury or damage caused by misuse of the product.
The risks associated with any misuse of the product shall be borne by the user alone.
Misuse of the product includes in particular:
• Use of any kind to transport persons.
• Misuse of the SFE as collision protection.
• Moving the SFE to the position compensation end position. The end positions must be monitored in
the LED mode STATUS (see section STATUS).
• The SFE is a dynamically excited oscillation system. As it must be prevented from reaching the
position compensation end positions, it is recommended that you start the system with a travel
speed lower than 100 mm/s when setting up applicative processes in an unlocked state.
• Oscillating movement patterns must be avoided during operation in an unlocked state, as this may
cause damage to the device.
2.3
Residual risks
Risks of damage, failure or destruction are:
• Removing the SFE from the handling system
• Massive force impact due to incorrect use
• Collision
• Incorrect connection to power
Exceeding the mechanical limit values
Exceeding the mechanical limit values may overload and destroy the mechanical
system components. Components which become loose may lead to personnel
injury and material damage.
Only use the SFE within the permitted operating limits.
Do not carry out any transfer journeys or oscillating movements in an unlocked
state.
en
Warning
2
Safety
Advertisement
Table of Contents
