Programme Packages; Favourite Programmes - Miele PDR 914 HP Operating And Installation Instructions

12 programmes are available.

Favourite programmes

Under
Laundrette Logo ext. time
-
4 timed drying programmes* with different temperature levels are time-controlled via an
external payment system.
The set value indicates the programme running time and cannot be modified by the user.
* The maximum programme running time is specified during initial commissioning.
Laundrette Logo int. time
-
4 timed drying programmes* with different temperature levels are time-controlled via the
tumble dryer electronic module.
The set value indicates the maximum programme running time and can be modified by
the user.
* The maximum programme running time is specified during initial commissioning.
External prog. selection
-
A communication module can be used to select the programme from an external ter-
minal.

Programme packages

This allows you to specify the scope of the tumble dryer programme. You can select all of
the programmes or individual programmes from the relevant programme packages.
The tumble dryer's additional scope of programmes can be configured. The programmes
are listed under "Programme chart".
Favourite programmes
After switching on, you can also select a programme via:  Favourites.
12 programmes can be stored as favourites based on your own priorities and require-
ments.
These favourites will also be made available in the control options
- Launderette ext. (12 prog)
- Launderette, basic (4 prog) (the first 4 of the 12 favourites).
You can specify the control option under
Tip: You can assign a different colour to each programme. In this case, the Prog. colour al-
location setting must be set to On.
Changing Favourite programmes
Select the programme you wish to change or replace.

Confirm the programme or the setting to be changed.

Another menu opens, enabling you to select a new programme or change the parameters.
Save
Confirm with the

Your selection is now active.
, you can set which 12 programmes to select/modify.
Controls
sensor control.
Supervisor level
.
49