Completing The Initial Commissioning Process - Miele PDR 914 HP Operating And Installation Instructions

Skipping payment
device set-up
Payment system
No payment
Timed
system
operation
Programme Timed op. +
control impul.counter
No payment system
Touch the

Touch OK to confirm.

The display will change to the next setting.

Completing the initial commissioning process

The commissioning process is complete when a programme lasting
longer than 10 minutes has been carried out in full.
If the power is interrupted prior to the start of the first drying pro-
gramme (e.g. if the machine is switched off with the  button), the
initial commissioning process can be completed again. Once a dry-
ing programme has been running for over 10 minutes, the initial
commissioning process cannot be performed again.
In the main menu, touch the  Programmes sensor control.

 Programmes
Cottons  Cottons
Cottons PRO Minimum iron
Swipe to the left with your finger until the

gramme is displayed.
 Programmes
Timed drying
Woollens
cool air
Timed drying
Delicates
warm air
Timed drying cool air
Touch the

Touch the flashing Start/Stop sensor control.

After this programme has finished, the tumble dryer is ready for use.
Initial commissioning
11:02
COM module
OK
sensor control.
11:02
Woollens
Delicates
11:02
Timed drying
hygiene
Basket - Low
temperature
programme.
Timed drying cool air
pro-
19