Nokia IP1220 Installation Manual page 98

7
Installing and Replacing Components Other than Network Interface Cards (NICs) and Accelerated Data Path
7. Locate and remove the existing compact flash memory card from the slot by gently sliding it
out of the slot.
8. Gently insert the new compact flash memory card into the slot.
9. Slide the chassis tray assembly back into the appliance until it clicks into place.
10. Resecure the chassis tray assembly retaining screws.
11. Replace the hard-disk drives.
12. Press the power switch, located on each power supply at the back of the appliance, to turn on
the power to the appliance.
Note
Make sure you turn on both power supplies.
Note
Disk-mirroring is disabled for the Nokia IP1200 Series flash-based appliance in the Nokia
IPSO v3.9 release.
98
All manuals and user guides at all-guides.com
IP1220 and IP1260 Security Platforms Installation Guide
00505.1