Table of Contents
Advertisement
4
Installing and Replacing Network Interface Cards and Accelerated Data Path (ADP) Services Modules
6. Gently pull the PMC carrier or ADP module out from the slot and place it on a suitable,
grounded work surface.
Note
You need to follow
ADP module and the carrier are provided as one unit.
7. Locate the bezel retaining screws, used to keep the NIC attached, on the underside of the
PMC carrier.
8. Remove the two bezel retaining screws with a Phillips screwdriver.
Note
If you are installing a NIC in an unoccupied slot on the PMC carrier, remove the blank
bezel that covers the slot and retain it for future use. Proceed to
52
All manuals and user guides at all-guides.com
step 7
through
step 13
only for NICs and not for ADP modules, as the
IP1220 and IP1260 Security Platforms Installation Guide
00310a.2
00311
step
11.
Advertisement
Table of Contents
