Nokia IP1220 Installation Manual page 89

Note
Because power to an IP1200 Series appliance is automatically disconnected when the
chassis tray assembly is opened, you do not need to manually disconnect the power for this
procedure. Any servicing of the appliance, however, should be completed with the chassis
tray assembly fully removed from the appliance.
1. Use Nokia Network Voyager or the CLI to perform an orderly shutdown of the IP1200
Series appliance.
For information about how to access Network Voyager and the related reference materials,
see "Using Nokia Network Voyager"
2. Loosen the four front panel retaining screws.
IP1220 and IP1260 Security Platforms Installation Guide
All manuals and user guides at all-guides.com
on page 44.
Installing a PC Card
IP1200
00507.2
89