Table of Contents
Advertisement
To rack mount the appliance
Caution
The appliance is heavy. Carefully remove it from the packaging.
1. Remove the appliance from the packaging.
2. Optionally, remove the fan unit from the back of the appliance.
a. Locate the fan unit and the four retaining screws that secure it on the back of the IP1200
Series.
b. Loosen the retaining screws by turning them counterclockwise.
c. Slowly pull the fan unit out of the chassis tray assembly toward the rear.
IP1220 and IP1260 Security Platforms Installation Guide
All manuals and user guides at all-guides.com
Fan unit
Before You Begin
00308a
00318.1
35
Advertisement
Table of Contents
