7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
tx-hold-multiplier
Syntax
tx-hold-multiplier multiplier
no tx-hold-multiplier
Context
config>system>lldp
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description
This command configures the multiplier of the tx-interval.
Parameters
multiplier — Specifies the multiplier of the tx-interval.
tx-interval
Syntax
tx-interval interval
no tx-interval
Context
config>system>lldp
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description
This command configures the LLDP transmit interval time.
Parameters
interval — Specifies the LLDP transmit interval time.
6.12.2.1.17
lldp
Syntax
lldp
Context
config>port>ethernet
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
3HE 17358 AAAB TQZZA
Values
2 to 10
Default
4
Values
5 to 32768
Default
30
LLDP Ethernet Port Commands
Use subject to Terms available at: www.nokia.com
© 2021 Nokia.
System Management
509