Nokia 7210 Configuration Manual page 338

System Management
Create
This command can be used to enable the time-range context.
Use the following syntax to create a time-range.
CLI Syntax:
The following example shows the command usage to create a time-range called
"test1".
Example:
Absolute
The absolute command configures a start and end time that will not repeat.
Use the following syntax to configure a non-repetitive time range.
CLI Syntax:
The following example shows the command usage to configure a non-repetitive time
range.
Example:
The following is a sample configuration output of an absolute time range beginning
on May 5, 2006 at 11:00 and ending May 6, 2006 at 11:01.
A:sim1>config>system>cron>time-range# show cron time-range detail
===============================================================================
Cron time-range details
===============================================================================
Name
Triggers
Status
Absolute
===============================================================================
A:sim1>config>system>cron>time-range#
338
config>system>cron
time-range name create
config>system>cron# time-range test1 create
config>system>cron>time-range$
config>system>cron>time-range$
absolute absolute-time end absolute-time
config>system>cron>time-range$ absolute start 2006/05/
05,11:00 end
2006/05/06,11:01
config>system>cron>time-range$
: test1
: 0
: Inactive
: start 2006/05/05,11:00 end 2006/05/06,11:01
© 2021 Nokia.
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 17358 AAAB TQZZA